Monderma Fontaine Travel 5.6 L stainless steel – Premium Pack – 2 Imperial GF filters
MONDERMA WATERFILTERS · IMPÉRIAL FILTERS
Monderma® Travel 5.6 L with 2 Impérial GF Filters
Premium Pack: Level Indicator Tap and Stainless Steel Base
Prepare your drinking water at home with a 5.6 L stainless steel gravity-fed water dispenser. The two Impérial GF filters combine a ceramic shell with an internal medium: granular activated carbon and zeolite. Pour cold drinking water into the upper tank and collect the filtered water in the lower reservoir, ready to be served from the tap.
Your configuration: Monderma Travel 5.6 L dispenser, 2 Impérial GF filters, and a stainless steel tap with level indicator, with a stainless steel riser base included.
5.6 L
dispenser capacity
2 filters
Impérial GF included
7,000 L
estimated capacity for the pair
12 months
maximum replacement guideline
📏 All the features of your Travel
| Feature | Detail |
|---|---|
| Model | Monderma Travel |
| Dispenser capacity | 5.6 L |
| Recommended use | 1 to 3 people, depending on consumption and refill frequency. |
| Approximate height | Approximately 46 cm — excluding the riser base. |
| Approximate tank diameter | Approximately 19 cm |
| Tank material | AISI 304 stainless steel |
| Tap included | Stainless steel tap with level indicator |
| Riser base | Included — AISI 304 stainless steel. |
| Filter elements included | 2 Impérial GF filters, with seals and mounting nuts. |
| Filter composition | Silver-impregnated microporous ceramic; internal medium: granular activated carbon and zeolite. |
| Filter size | Approximately 17.8 cm high × 7 cm in diameter (7 × 2.75 inches). |
| Estimated filtration capacity | 7,000 L for the 2 filters, depending on the water and usage. |
| Filter replacement | Maximum 12 months after the pair is put into service, or sooner depending on usage and the condition of the elements. |
| Filtration rate | Approximately 3 L/h for the pair, as a guideline; flow rate varies during filling. |
| Water to use | Cold mains drinking water; gravity-fed, without pressure. |
| Installation | Place on a flat, stable surface; no electricity or plumbing connection required. |
| Filter maintenance | The outer ceramic can be cleaned with cold water, according to the instructions. |
| Approximate dispenser weight | 3.5 kg |
Approximate overall dimensions. Also allow space to access the lid and serve water. The filtration capacity and stated durations vary depending on the water and conditions of use.
🌿 Impérial GF: ceramic and granular activated carbon
Water first passes through a microporous ceramic shell, then through the granular activated carbon and zeolite placed inside. The ceramic surface remains accessible for removing deposits during maintenance.
The key to choosing: GF designates the granular carbon version of the Impérial range. The AMB version uses a compressed carbon block; their flow rate and capacity guidelines differ.
✨ The convenience of the premium pack
The stainless steel tap with level indicator allows you to see the amount of water available in the reservoir. The stainless steel riser base raises the dispenser to make it easier to place a glass under the tap.
Allow for a stable location with enough clearance above the lid to fill the tank. The dispenser dimensions shown in the table are excluding the riser base.
💧 GF: flow rate guidelines
Approximately 3 litres per hour with the two GF filters: this guideline is indicative. The water level in the upper tank, preparation, and the condition of the filters affect the actual flow rate.
The first filtration may be slow while the ceramic becomes saturated. The flow rate also changes during filling: as the level drops, the water pressure decreases.
To maintain convenient use: prepare the water in advance and gently clean the ceramic when the flow rate slows. Persistent slowing after cleaning may indicate that it is time to replace the elements.
🛠️ First use: four steps
- 1. Prepare the parts. Wash your hands, clean and rinse the tanks and the tap. Check that the ceramic on both filters is intact.
- 2. Install the filters. Place the flat seal against the base of each element inside the upper tank. Insert the stem through the hole and hand-tighten the nut underneath without forcing it. Seal any unused openings with the appropriate plugs.
- 3. Prepare the ceramic by gravity. Filter one full tank and discard all the collected water. Leave the filters in place overnight without using the dispenser. The next day, fill a second time and also discard the filtered water.
- 4. Begin use. The water from the next fill can be consumed. Before filling the upper tank, ensure that the lower reservoir can accommodate the added volume.
Pressure-free preparation: do not force water through the filter's threaded stem. The ceramic elements are prepared according to their own instructions.
🧽 Filter maintenance and replacement
Clean the surface when the flow rate slows or deposits accumulate on the surface. Carefully remove the filters and use a clean soft brush under cold water, without soap or detergent. Rinse, then hand-tighten the seals and nuts back into place.
After this surface cleaning, the instructions do not require repeating the two preparation fills. Cleaning does not reset the usage life.
The 7,000-litre capacity applies to the pair and varies depending on the water and usage. Note the date the pair is put into service: Monderma recommends replacement after a maximum of 12 months, or sooner if an element is damaged or if the flow rate remains insufficient after cleaning.
☀️ Good daily practices
- Keep the reservoir clean. The system instructions recommend cleaning the lower tank every 3 to 4 days. Remove the filters before cleaning the tanks with mild dishwashing liquid, then rinse thoroughly.
- Adapt each fill. A partially full reservoir must be able to accommodate all the water you add to the upper tank.
- Protect the elements. Use cold drinking water, avoid heat, and protect the filters from frost and temperatures below 4.5°C.
- After a prolonged absence, discard the first filtered fill and follow the instructions.
📦 Your set contents
- 1 complete Monderma Travel 5.6 L stainless steel dispenser, with upper and lower tanks and lid.
- 2 Impérial GF filters with their seals and mounting nuts.
- 1 stainless steel tap with level indicator.
- 1 stainless steel riser base.
- 1 installation and maintenance guide.
- 1 black protective bag.
💡 What about minerals?
This filtration does not demineralize the water. A TDS tester measures dissolved substances; it cannot assess filter effectiveness. Its reading may increase at startup due to the ceramic's mineral materials.
Origin of the filter elements: the Impérial GF filters are made in the United States.
🔄 Replace my filters
To choose the replacement filter for your equipment, find the following references:
Use the manual for the installed filter for its commissioning, maintenance, and replacement.
Manuals, advice and documentation
- Imperial GF manual in French: preparation, maintenance and filtration indicators
- Complete Monderma water dispenser manual: installation, maintenance and warranty conditions
- Understand the difference between Imperial GF and AMB filters
- Envirotek manufacturer report No. 16-112 (2016) — test document
- Tests and certificates published by Monderma: dates, references and scope of the documents
- Manufacturer's NSF/ANSI 42 document — dated 2020 copy, scope specified below
How to read the documents: the Envirotek report mentions the NSF 42 and 53 standards and describes results for the tested sample. It does not present two separately identified sets of results for GF and AMB. The manufacturer's NSF/ANSI 42 document, dated 2020, is also not sufficient to establish certification for each Monderma water dispenser equipped with it. Check the exact scope of the documents before attributing a particular reduction to a model.